
40G SR4 850nm QSFP+ Optical Transceiver
Features
RoHS 6/6 compliant
+3.3V single power supply
Low power consumption
Multi rate of up to 10.3125Gbps
Support 40GBASE-SR4/QDR application
Compliant to QSFP+ Electrical MSA SFF-8436
Transmission distance up to 150m (OM3) and 300m (OM3) optional
Operating case temp Commercial: 0°C to +70 °C
Applications
InfiniBand QDR
Other optical links
40GBASE-SR4 at 10.3125Gbps per lane
Absolute Maximum Ratings
Table 1- Absolute Maximum Ratings
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Notes |
Supply Voltage |
Vcc3 |
-0.5 |
- |
+3.6 |
V |
|
Storage Temperature |
Ts |
-10 |
- |
+85 |
°C |
|
Operating Humidity |
RH |
+5 |
- |
+85 |
% |
1 |
Receiver Damage Threshold per Lane |
PIND |
+3.4 |
- |
- |
dBm |
|
Note: 1 No condensation
Recommended Operating Conditions
Table 2- Recommended operating Conditions
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Notes |
Operating Case Temperature |
TC |
0 |
- |
+70 |
°C |
|
Power Supply Voltage |
Vcc |
3.14 |
3.3 |
3.47 |
V |
|
Power Dissipation |
Pd |
- |
- |
1.5 |
W |
|
Bit Rate |
BR |
1.25 |
10.3125 |
- |
Gbps |
|
Electrical Characteristics
Table 3- Electrical Characteristics
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Units |
Notes |
|
Input Logic Level High |
VIH |
2.5 |
- |
VCC+0.3 |
V |
|
|
Input Logic Level Low |
VIL |
0 |
- |
0.8 |
V |
|
|
Output Logic Level High |
VOH |
2.4 |
- |
VCC |
V |
|
|
Output Logic Level Low |
VOL |
0 |
- |
0.4 |
V |
|
|
Transmitter |
|||||||
Differential Data Input Swing |
Vin,P-P |
200 |
- |
1600 |
mVPP |
|
|
Input Differential Impedance |
ZIN |
80 |
100 |
120 |
Ω |
|
|
Receiver |
|||||||
Differential Date Output Swing |
Vout |
350 |
- |
1000 |
mV |
|
|
Output Differential Impedance |
ZD |
80 |
100 |
120 |
Ω |
|
Optical Characteristics
Table 4-Optical Characteristics
Parameter |
Symbol |
Unit |
Min |
Typ |
Max |
Notes |
Optical transmitter Characteristics |
||||||
Bit Rate |
BR |
Gbps |
1.25 |
10.3125 |
- |
|
Center Wavelength Range |
λc |
nm |
830 |
850 |
870 |
|
RMS Spectral Width |
Δλ |
nm |
- |
- |
0.65 |
|
Average Launch power Tx_off |
Poff |
dBm |
- |
- |
-30 |
|
Launch Optical Power |
P0 |
dBm |
-7.5 |
|
2 |
1 |
Extinction Ratio |
ER |
dB |
3 |
- |
- |
|
Optical Receiver Characteristics |
||||||
Bit Rate |
BR |
Gbps |
1.25 |
10.3125 |
- |
|
Sensitivity@BER=E-12 |
BER |
dBm |
- |
- |
-10.3 |
|
Overload Input Optical Power |
PIN |
dBm |
2.5 |
- |
- |
2 |
Center Wavelength Range |
λc |
nm |
820 |
- |
880 |
|
LOS Assert |
- |
dBm |
-30 |
- |
- |
|
LOS De-Assert |
- |
dBm |
- |
- |
-12 |
|
LOS Hysteresis |
- |
dB |
0.5 |
- |
- |
|
Note:
1. Coupled into 50/125 MMF.
2. Measured with PRBS 231-1 test pattern @10.3125Gbps.BER=E-12
Table 5-Pin Function Definitions
Pin |
Symbol |
Name/Description |
Notes |
1 |
GND |
Ground |
1 |
2 |
Tx2n |
Transmitter Inverted Data Input |
|
3 |
Tx2p |
Transmitter Non-Inverted Data Input |
|
4 |
GND |
Ground |
1 |
5 |
Tx4n |
Transmitter Inverted Data Input |
|
6 |
Tx4p |
Transmitter Non-Inverted Data Input |
|
7 |
GND |
Ground |
1 |
8 |
ModSelL |
Module Select |
|
9 |
ResetL |
Module Reset |
|
10 |
Vcc Rx |
+3.3V Power Supply Receiver |
|
11 |
SCL |
2-wire serial interface clock |
|
12 |
SDA |
2-wire serial interface data |
|
13 |
GND |
Ground |
1 |
14 |
Rx3p |
Receiver Non-Inverted Data Output |
|
15 |
Rx3n |
Receiver Inverted Data Output |
|
16 |
GND |
Ground |
1 |
17 |
Rx1p |
Receiver Non-Inverted Data Output |
|
18 |
Rx1n |
Receiver Inverted Data Output |
|
19 |
GND |
Ground |
1 |
20 |
GND |
Ground |
1 |
21 |
Rx2n |
Receiver Inverted Data Output |
|
22 |
Rx2p |
Receiver Non-Inverted Data Output |
|
23 |
GND |
Ground |
1 |
24 |
Rx4n |
Receiver Inverted Data Output |
|
25 |
Rx4p |
Receiver Non-Inverted Data Output |
|
26 |
GND |
Ground |
1 |
27 |
ModPrsL |
Module Present |
|
28 |
IntL |
Interrupt |
|
29 |
Vcc Tx |
+3.3V Power supply transmitter |
|
30 |
Vcc1 |
+3.3V Power supply |
|
31 |
LPMode |
Low Power Mode |
|
32 |
GND |
Ground |
1 |
33 |
Tx3p |
Transmitter Non-Inverted Data Input |
|
34 |
Tx3n |
Transmitter Inverted Data Input |
|
35 |
GND |
Ground |
1 |
36 |
Tx1p |
Transmitter Non-Inverted Data Input |
|
37 |
Tx1n |
Transmitter Inverted Data Input |
|
38 |
GND |
Ground |
1 |
Note: 1. Circuit ground is internally isolated from chassis ground.
Order Information
Part No. |
Bit Rate (Gbps) |
Laser (nm) |
Distance note1 |
Fiber Type |
DDMI |
Connector |
Tempnote2 |
HC-QP-M85M-01D |
41.25 |
850 |
1~300m |
MMF |
YES |
MPO 1x12 |
0℃~+70℃ |
Note:
1. OM3 fiber, 150m and 300m optional
2. Case Temperature
If you need more information , Please contact us .