Click to open expanded view
1XN High power Wide spectrum large core diameter optical switch
Product features
High power
Low insertion loss
The wavelength range is wide
Low crosstalk
High stability and reliability
Parallel interface (TTL level) control
Application
System monitoring
Optical fiber sensing
Multi-channel optical monitoring
Laboratory research and development
Technical parameters
|
Model |
HC-HFSW-1×N-A-B-C-D-E-F-G |
|
Wavelength range nm |
400-2500 |
|
Insertion loss dB |
Typ1.0 Max:1.5 |
|
Return loss dB |
≥30 |
|
Channel crosstalk dB |
≥50 |
|
Polarization dependent loss, dB |
≤0.05 |
|
Wavelength-dependent loss dB |
≤0.25 |
|
Temperature-dependent loss dB |
≤0.25 |
|
Repeatability dB |
≤±0.05 |
|
Operating voltage V |
+5 （DC） |
|
Service life times |
≥107 |
|
Switching time ms |
≤ 20 (adjacent channel switching) |
|
The optical pow W is transmitted |
≤5 |
|
Operating temperature ℃ |
-20～+70 |
|
Storage temperature ℃ |
-40～+85 |
Note: 1. The above indicators do not include connectors;
2. The wavelength range can be customized to 200-1200nm.
Pin definition
DB 9 (TTL level):
|
Pin number |
Signal direction, type (In/Out/Power) |
Pin Definition |
Functional description |
|
1 |
In |
D0 |
Data bit. D3 ~ D0 are binary numbers, D3 is the high order, and D0 is the low order. Up to 16 optical switches can be controlled by 4 data bits. Where 0000 B = channel 1; 1111 B = Channel 16. When in use, the data is transmitted according to the actual channel number of the optical switch. |
|
2 |
In |
D1 |
|
|
3 |
In |
D2 |
|
|
4 |
In |
D3 |
|
|
5 |
In |
/Reset |
Low is reset to Channel 0 and the high data bit is active. |
|
6 |
Out |
/Ready |
The low level is ready to reset or receive data. |
|
7 |
Out |
Error |
A high level indicates that the optical module is operating incorrectly. |
|
8 |
Power |
GND |
Ground wire |
|
9 |
Power |
DC 5V |
DC 5V, 1.0 A working power supply |
DB15 (TTL level):
|
Pin number |
Signal direction, type (In/Out/Power) |
Pin Definition |
Functional description |
|
2 |
In |
D0 |
Data bits D5 to D0 are binary numbers, D5 is the high bit, and D0 is the low bit. The 6-bit binary number can control the switching of up to 64 optical switches. Where 000000 B = channel 1; 1111 11 B = Channel 64. Data should be sent according to the actual number of optical paths of the optical switch. |
|
3 |
In |
D1 |
|
|
4 |
In |
D2 |
|
|
5 |
In |
D3 |
|
|
6 |
In |
D4 |
|
|
10 |
In |
D5 |
|
|
11 |
In |
/Reset |
Low reset, high data bit active. |
|
7 |
Out |
/Ready |
The low level is ready to reset or receive data. |
|
8 |
Out |
Error |
A high level indicates that an error occurred. |
|
15 |
Power |
5V |
Power supply for digital circuits |
|
12 |
Power |
5V |
Motor power supply |
|
1，9 |
Power |
Ground |
Common Ground |
|
13，14 |
Not connected |
||
Ordering Information HC-HFSW-1 × N-A-B-C-D-E-F-G
|
N |
A |
B |
C |
D |
E |
F |
|
Number of channels |
Fiber specification |
Operating wavelength |
Numerical aperture |
Fiber outer diameter |
Fiber output length (including connector) |
Connector |
|
1 ~ 32 |
105: 105/125um 200: 200/220um 400：400/440um 600：600/660um 1000：1000um X: Others
|
405: 405nm 532: 532nm 650: 650nm 785: 785nm 980: 980nm 1064: 1064nm X: Others
|
11:0.11 12:0.12 22：0.22 X: Others |
90:900um 20: 2.0mm 30: 3.0mm X: Others |
05: 0.5m±5cm 10: 1.0m±5cm 15: 1.5m±5cm X: Others |
OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC SMA:SMA905 X: Others |
|
G (size code) |
Applicable model |
Applicable core diameter |
Overall dimension (mm) |
|
M1 |
1×N (1 |
105um/200um/400um |
135×60×35 |
|
M2 |
1×N (16 |
105um/200um |
184×78×66 |
|
M3 |
1×N (1 |
600um |
220×204×48 |
|
M3 |
1×N (1 |
1000um |
220×204×48 |
If you need more support , Please contact us .
